中文                  English
 
Company News
Industry News
  Home Electric Boiler
  Electric Steam Boilers
  Newboneng Precision Steam Boilers
  Precision Electric Hot Water Boilers
  Electric Storage Water Boilers
  Electric Hot water boiler
  Product accessories
  Hot Water Storage Boiler
  Commercial electrical boiler heat storage system
  residential electric boiler heating system
 
    Industry News   Newboneng Electric Boiler >>Industry News

Energy-saving electric heating stove electricity skills

1, a reasonable choice of the power of the electric heating stove
The choice of electric heating stove power must be calculated in accordance with the heat load of the heating room. Different housing structures, the room height, area lighting, room location, the heat load is different. We propose that energy-efficient buildings can take 13 - 15m2 / KW; ordinary buildings can take 10 - 11 m2 / KW; villas, bungalows can take 8 - 9 m2 / KW; sealed condition is not good, the room is greater than 2.7 meters in height or frequently was and out of the housing should be appropriate to reduce the per kilowatt of electric heating stove heating area.
Many users believe that the power of the smaller electric heating stove heating costs lower, but in fact the opposite is true, the power of the larger design electric heating stove is not to increase the running costs of the heating period, but saving the running costs of the heating period . Often have the power of the users of electric heating stove up less room heat load requirements, not only caused by the electric heating stove kept little or downtime, and reach the desired heating temperature.

2, electric heating boiler of a reasonable adjustment for the return water temperature
The current boiler (electric heating stove) hot water heating system can be divided into three main forms of supply and return water temperature difference as follows: in the low temperature hot water radiator heating system, the ideal electric boiler (electric heating stove) for backwater the temperature difference should adopt the 20 - 25 ° C; in the low temperature hot water radiant floor heating system, the ideal electric boiler (electric heating stove) for the return water temperature should be 5 - 10 ° C; in the fan coil heating system, the ideal electric boiler (electric heating stove) for the return water temperature should adopt the 4 - 5 ° C. Appropriate adjustment for the backwater of the temperature, can improve the heat transfer coefficient becomes higher efficiency, can significantly reduce the running costs of the entire heating period.

3, a reasonable set the upper limit temperature of the electric heating stove
Electric heating stove works intermittent work in a heated state, that is, when the water temperature is less than the upper limit temperature electric heating stove, electric heating stove in shut down the insulating state when the water temperature reaches the upper limit temperature. Electric heating stove will cause the actual water temperature is difficult to set the upper limit of the electric heating stove temperature in the heating period the coldest days, the heat value of electric heating stove just to meet or heat load, less than the demand for rooms is too high, reach the upper limit temperature, so that the electric heating stove will be in the 24 hours of heating state.

4, setting reasonable night temperature control

Electric heating stove can set3 work hours, sleep at night, we do not require high heating temperature, heating temperature can be properly reduced, this can save the operation cost of heating period.

5, use of thermostatic radiator valves

By adjusting the radiator thermostatic valve can be free to adjust the temperature of the room, we can put the Deputy bedroom, storage room not frequented by lowering the temperature of the room thermostatic radiator valve, it can also save the heating period of operation.

6, a reasonable choice of radiators
Characteristics: copper waterway of copper and aluminum composite radiator corrosion, aluminum fin heat good, strong alliance, anti-corrosion effect. Copper and aluminum composite radiator pressure capacity, corrosion resistance, good heat dissipation effect, from the heating system restrictions, the price is the middle. More suitable for electric heating stove.

7, good insulation of the room
7, good insulation of the room
Heating energy consumption, the most important factor is the insulation of the building maintenance material, whether heating of the surrounding adjacent cells and products, thermal efficiency and heating mode. This is any product can not give an accurate energy consumption reasons. We recommend that users, if your house is not insulated, better thermal insulation, especially the decoration of the new purchase new houses must take into account in the renovation for thermal insulation, 100 square meters of housing costs only a few thousand dollars, compared to spend tens of thousands or even hundreds of thousands to do the conventional decoration is a very small expenditure, but winter heating energy saving, energy-saving effect of cool in the summer but there is a difference to the cost of several times, 2-3 years can be saved under the thermal insulation, but for decades to enjoy the effect of energy saving.

  Copyright @ Newboneng Electric Boiler CO.LTD. All Right Reserved. Su ICP preparation :05066198